Module properties: Non-isolated voltage regulator
Input voltage: 10.5-70VDC
Input current: Max 10A
Continuous input current: Max 8A
Output voltage: 2.5-58VDC
Output current: Max 8A
Continuous output current: Max 6A
Constant current adjustable: 0.5-8A
Output power: Max 180W max
Standby current: About 20mA
Conversion efficiency: About 90%
Reverse polarity protection: No, please first determine positive and negative and then power on
Dimensions: 70Ã52Ã21mm / 2.76Ã2.05Ã0.83in
Weight: 74g (approx.)
Output Voltage / Current Regulation Method:
1. Adjust the voltage adjustment potentiometer (clockwise to reduce the voltage, counterclockwise to increase the voltage), set the output voltage to the voltage you need according to your load requirements.
2. Adjust the current adjustment potentiometer clockwise by about 20 turns to set the output current to the minimum, connect the LED, and adjust to the current you need. For battery charging, after the battery is fully discharged, connected the battery to the output and adjust to the current you need. Please do not adjust the current by short circuit due to the circuit structure of this boost buck module.
1 Ã Boost Buck Converter
1. The input and output current cannot work at the Max value, and the input plus output currents can not exceed 12A
2. When the module temperature exceeds 60 degrees, heat dissipation needs to be strengthened.